 |
| Laser Converter Board with solder paste |
Hey everyone, the Laser Converter boards are back in stock. I've had a lot of people messaging me about when the boards are going to be back in stock so I'm guessing they will go fast. Not to worry though, the next (much larger) batch is being made as I'm typing this.
Hey cris would your board work as a drop in replacment for this board?
ReplyDeletehttp://pl.jebolist.com/HG06-02-0006/005.jpg
Yes, the pinout of the PWR and motor connectors appear to be the same.
DeleteHi Chris,
ReplyDeletewhen do I need your 3 axis board? I will be ordering a laser machine like this http://pl.jebolist.com/HG06-02-0006/001.jpg , which of your board will be ok for me. By the way.. awesome!! awesome!! awesome!! job you did.. I can't wait to get the board and machine.
Thanks! The laser cutter you link to looks identical to mine. The only difference between the 2-axis and 3-axis options is what ships with the board. The board is the same. In the 2-axis option I send everything you need to replace the moshii board. The 3-axis version is for those who want to experiment or add extra functionality to their cutters. (automatic table height adjustment, ability to cut on round or cylindrical objects) Even if you only buy the 2-axis you can purchase a stepper driver later and have the 3rd axis option. Hope this answered your questions.
DeleteThanks Chris, you answered my question, I'll go for the 3 Axis, hoping that beside using it for the laser, if needed I can move cables around and use the same board to run/test a small light weight CNC router? or not?
DeleteYou sure can. Each stepper motor connector and each limit switch has a breakout connector so that you can solder in your connector of choice for the machine of your choice.
DeleteCool!! one 3 axis board ordered, wish me luck on my conversion mission. what is the thickest wood and plastic you have cut so far and at what speed?.
DeleteCool post!!! I liked it, Thanks for share..Buy CNC Router
ReplyDeletebest regards
ReplyDeleteI have a problem with machine
when I turn the power supply lets the red flashes.
head does not move
if you can help me please my email is
buy it online and I could not use it
damage in shipment had problems, the data bus than repair
Chris I would like one of your boards but first I would like to know if I can use vectors Vcut 7.0 or photo v-carve with it and I cut a lot of DXF files will this board let me do this on my cheap Chinese laser ? Thank you Martin
ReplyDeleteHi Chris
ReplyDeletejust wondering if you are still selling these conversion boards?
usagi_13@hotmail.com
Ho Chriss
ReplyDeleteI also wondering if you still sell these boards.
If not, where can i found pcb jpg file at least, or everything else tou build own board, because in downloads section i did not find pcb , only chematic and other useful stuff. If out of stock, what can we do ?